Home/Products/Stackers and Reclaimers /JXLD-1000 Crawler mobile discharge stacker
Stackers and Reclaimers
JXLD-1000 Crawler mobile discharge stacker

  • Views: 37
  • Author: Puding Bucket Wheel
Product Details

Compared with the tire stacker, the crawler mobile stacking equipment is favored by industrial and mining enterprises with harsh environments such as mining, aggregate and coal because of its outstanding site adaptability. The crawler stacker designed and manufactured by our company has the advantages of reliable performance, large production capacity and high degree of automation, and the wide plate chain conveying design at the tail of the equipment can meet the direct feeding of the dump truck, avoiding the secondary transfer and stacking process of materials, and achieving cost reduction and efficiency increase.


Features and Benefits:

The total power of the equipment is 149.5KW, and the effective power is 89.5KW. With external 380 volt alternating current, each kilowatt-hour of electricity is calculated according to the local unit price of 1 yuan (local actual unit price), the cost of each cubic stacking material is 0.134 yuan, and the diesel generator set is 150KW, the average fuel consumption per hour is 42L, and the cost of each cubic stacking material is 0.294 yuan according to the diesel 7 yuan / calculation. Compared with traditional excavators, the same operating cost is reduced by 54%, and one working capacity replaces 2-10 traditional excavators, and the procurement cost is reduced by 50%. The fuel consumption per hour is much smaller than that of a wheel loader. The size of the conveyed material is less than 300mm (about 30cm or less).

The dump truck feeds directly and the feeding height can be customized according to the dump truck model:

The site is adaptable and flexible;

Complete dust removal/dust suppression measures, low work pollution;

Working capacity up to 1000m/h (depending on the loading and unloading frequency of the dump truck):

Lower investment costs;

Scope of application

Cement, steel, electric power, quarries, ports and other industries

Port loading/unloading supporting assistance

Direct unloading of road trucks, loaders, carts, etc

Configure options

Diesel direct drive (optional dual power, electric motor drive belt)

Dust removal measures: galvanized the whole machine, dust cloth covering, telescopic chute dust removal, water spray dust suppression system

Hydraulic lifting ramp, multi-directional feeding, improve the efficiency of unloading and conveying

High load-bearing plate chain belts



Technical parameters
No.NameTechnical ParameterRemark
1Machine size: (mm)24000x5200x4100
2Chassis drive formTires + hydraulic drive
3Maximum traveling speed:(Km/h)0-3
4Total mass of equipment;(T)68
5Ability to work:(T/h)1000
6Length of discharge bin:(mm)4415
7Width of the discharge bin:(mm)4675
8Strip width of stripper:(mm)2400
9Stripper strip length:(mm)13000
10Discharge drive formMotor reducer
11Discharge drive power:(Kw)90
12Discharge operation capacity:(T/h)1000
13Specific gravity of the material:(T/m3)2.7
14The length of the main outfeed:(mm)13000
15The width of the main outfeed:(mm)1400
16Belt speed of the main discharge belt:(m/s)3.15
17Diameter of the main discharge belt idler:(mm)φ108
18Groove angle of the main discharge belt idler:()35
19Drive form of main discharge belt:Motor reducer
20Drive power of the main outfeed:(Kw)75
21Main discharge belt working capacity:(T/h)1000
22Folding stacking arm length::(mm)5800
23Width of the telescopic belt:(mm)1400
24Telescopic belt roller diameter:(mm)φ108
25Telescopic belt roller groove angle:(°)35
26Telescopic belt working capacity:(T/h)1000
27Pitch angle of stacking arm(°)+20°+5
28Stacker arm swivel angle(°)士60°
29Stacking height:(mm)8000