- Views: 21
- Author: Puding Bucket Wheel

Compared with the tire stacker, the crawler mobile stacking equipment is favored by industrial and mining enterprises with harsh environments such as mining, aggregate and coal because of its outstanding site adaptability. The crawler stacker designed and manufactured by our company has the advantages of reliable performance, large production capacity and high degree of automation, and the wide plate chain conveying design at the tail of the equipment can meet the direct feeding of the dump truck, avoiding the secondary transfer and stacking process of materials, and achieving cost reduction and efficiency increase.
Features and Benefits:
The total power of the equipment is 149.5KW, and the effective power is 89.5KW. With external 380 volt alternating current, each kilowatt-hour of electricity is calculated according to the local unit price of 1 yuan (local actual unit price), the cost of each cubic stacking material is 0.134 yuan, and the diesel generator set is 150KW, the average fuel consumption per hour is 42L, and the cost of each cubic stacking material is 0.294 yuan according to the diesel 7 yuan / calculation. Compared with traditional excavators, the same operating cost is reduced by 54%, and one working capacity replaces 2-10 traditional excavators, and the procurement cost is reduced by 50%. The fuel consumption per hour is much smaller than that of a wheel loader. The size of the conveyed material is less than 300mm (about 30cm or less).
The dump truck feeds directly and the feeding height can be customized according to the dump truck model:
The site is adaptable and flexible;
Complete dust removal/dust suppression measures, low work pollution;
Working capacity up to 1000m/h (depending on the loading and unloading frequency of the dump truck):
Lower investment costs;
Scope of application
Cement, steel, electric power, quarries, ports and other industries
Port loading/unloading supporting assistance
Direct unloading of road trucks, loaders, carts, etc
Configure options
Diesel direct drive (optional dual power, electric motor drive belt)
Dust removal measures: galvanized the whole machine, dust cloth covering, telescopic chute dust removal, water spray dust suppression system
Hydraulic lifting ramp, multi-directional feeding, improve the efficiency of unloading and conveying
High load-bearing plate chain belts
No. | Name | Technical Parameter | Remark |
1 | Machine size: (mm) | 24000x5200x4100 | |
2 | Chassis drive form | Tires + hydraulic drive | |
3 | Maximum traveling speed:(Km/h) | 0-3 | |
4 | Total mass of equipment;(T) | 68 | |
5 | Ability to work:(T/h) | 1000 | |
6 | Length of discharge bin:(mm) | 4415 | |
7 | Width of the discharge bin:(mm) | 4675 | |
8 | Strip width of stripper:(mm) | 2400 | |
9 | Stripper strip length:(mm) | 13000 | |
10 | Discharge drive form | Motor reducer | |
11 | Discharge drive power:(Kw) | 90 | |
12 | Discharge operation capacity:(T/h) | 1000 | |
13 | Specific gravity of the material:(T/m3) | 2.7 | |
14 | The length of the main outfeed:(mm) | 13000 | |
15 | The width of the main outfeed:(mm) | 1400 | |
16 | Belt speed of the main discharge belt:(m/s) | 3.15 | |
17 | Diameter of the main discharge belt idler:(mm) | φ108 | |
18 | Groove angle of the main discharge belt idler:(°) | 35 | |
19 | Drive form of main discharge belt: | Motor reducer | |
20 | Drive power of the main outfeed:(Kw) | 75 | |
21 | Main discharge belt working capacity:(T/h) | 1000 | |
22 | Folding stacking arm length::(mm) | 5800 | |
23 | Width of the telescopic belt:(mm) | 1400 | |
24 | Telescopic belt roller diameter:(mm) | φ108 | |
25 | Telescopic belt roller groove angle:(°) | 35 | |
26 | Telescopic belt working capacity:(T/h) | 1000 | |
27 | Pitch angle of stacking arm(°) | +20°+5 | |
28 | Stacker arm swivel angle(°) | 士60° | |
29 | Stacking height:(mm) | 8000 |