Home/Products/Bucket-Wheel Excavators/JXLQ-1000 Crawler bucket wheel loading and reclaimer
Bucket-Wheel Excavators
JXLQ-1000 Crawler bucket wheel loading and reclaimer

  • Views: 21
  • Author: Puding Bucket Wheel
Product Details

I、Main applications

JXLQ-1000 tracked mobile single bucket wheel, with advanced design and manufacturing means, with perfect operation capability, it is suitable for stacking and loading and fetching loose materials in the storage yard in the industries of mining, coal, cement, municipal waste disposal, coking, large and medium-sized thermal power plants and metallurgical enterprises. Through conveyor belts, vehicles and other transportation equipment, the loose materials are transported into the storage yard or conveyed to the required location through conveyor belts. It is a kind of large and medium-sized loading and unloading equipment with high efficiency and continuous operation. 

II、Product highlights 

Structural design of the main components, and the optimization design of bucket wheel drive system transmission device, automatic control technology of bucket wheel stacker and reclaimer, field communication network technology, remote communication system technology, using computer vision technology monitoring the side, method, virtual prototype technology and virtual reality technology of bucket wheel reclaimer, amplitude device kinematic simulation technology, bucket arm

modal analysis, CATIA bucket 3D modeling technology and the application of power detection technology, improve the stability and reliability of equipment application

and operation. 

(1) High energy efficiency: for bulk materials, large continuous reclaiming capacity, wide working surface, high efficiency, rapid crawler travel and machine movement, saving time. 

(2) Less people: 1~2 people to operate (or unmanned) has realized automatic mining. 

(3) Low energy consumption: the total power of the equipment is 223KW, and the effective power is 206KW. With external 380 V AC, per kilowatt hour, calculated according to the local unit price of 1.5 yuan (local actual unit price), the mining cost per cubic meter is 0.31 yuan. Diesel generator sets with a power of 250KW, and it consumes 68L of oil per hour. According to the diesel calculation of 7 yuan / L, the mining cost per cubic meter is 0.952 yuan. Compared with traditional excavators, the same operating cost is reduced by 67%, and the procurement cost is reduced by 50%. One working capacity to replace 2-10 traditional excavators.

(4) Low mechanical use and maintenance cost: less vulnerable parts for daily maintenance, excavation bucket, bucket teeth, rollers, etc. 

(5) Good environmental protection performance: bucket wheel excavation, excavation arm conveying system, discharge arm conveying system running at low speed, less dust. (6) Good reliability: the whole machine uses 380V AC / diesel generator set as the power source, motor, reducer, etc. using domestic brands, electrical control

components, PLC, hydraulic system pump, valve using imported parts. 

(7) Equipment forward-looking: through the intelligent design of equipment control, it has realized the advanced automatic unmanned reclaiming, remote monitoring of the field working screen, remote control of equipment operation, remote monitoring of equipment operation data, equipment fault alarm maintenance, etc

The lubrication system improves the service life of each rotary component and reduces the equipment failure rate.


Technical parameters

0.jpg

No.NameTechnical ParameterRemark
1Machine size: (mm)24439x5000x6139
2Track-driven hydraulic motor:customizable
3Track-driven hydraulic pump:customizable
4Crawler travel speed:(m/min)8.5
5Track ground specific pressure:(kpa)125
6Track shoe width(mm)1000
7Chassis width(mm)4600
8Dozer width(mm)5000
9Track-driven motor power:(Kw)75Soft-start ABB
10Bucket wheel diameter:(mm)6000
11料斗数量:(mm)10
12Rated bucket capacity(m3)0.35
13Unit cutting force:kg/cm2120
14Wheel speed:r/min6
15The length of the reclaiming arm:(mm)9700
16Rated output(m³/s)1000